Infrastructure

Drainage inspection well D800 ball

It is used in rainwater systems as a sand collecting well. D560 mm and D400 mm PE plastic pipes can be used for well elevation. The pipe must be welded to the well. If necessary, the well may be cut in half from the center rib and the resulting halves can be used for the bottom and ceiling of the D800 PE pipe. The useful capacity of the well is 275 litres. The maximum installation depth of the well is 2.5 m.

Manhole shell D850 ball

Manhole shell D850 ball

It is used in rainwater systems as a sand collecting well, sauna water draining, as a sampling well or as a pump shell. D560 mm and D400 mm PE plastic pipes can be used for well elevation. The pipe must be welded to the well. The useful capacity of the well is 300 litres and the maximum installation depth of the well is 2.5 m.

Manhole extention D600

Manhole extension D600

Manhole extension D600, H1000 mm. If needed, the manhole extensions can be cut shorter between the ribs to shorten the length of the extension. Manhole extension is suitable for both plastic covers and floating ductile iron covers. Upon request, we also offer mounting and sealing.

Manhole shell D500 H500

Manhole shell D500 with the height of 500 mm can be used for both sewer and rainwater pumping, as a floor drain, as a manhole, as a sampling well or as a small grease separator. The well can be fitted with a D500 floating ductile iron cover or a D400 plastic telescopic cover.

Manhole shell D500 H1500

Manhole shell D500 with the height of 1500 mm can be used for both sewer and rainwater pumping, as a manhole or as a sampling well. If necessary, the well can be extended with a D500 manhole shell, which is 500 mm in height. The well can be fitted with a D500 floating ductile iron cover or a D400 plastic telescopic cover .

Manhole shell D800

Manhole shell D800 can be used for both sewer and rainwater pumping, as a manhole, as a sampling well, as a grease separator, as an oil catcher, as a water well or as a shutter. If required, the well can be extended with the service well extension D600. The well can be fitted with a D600 floating ductile iron cover, a plastic dome cover D600 and 800 or a plastic telescopic cover D600. Maximum installation depth is 3.5 m.

Manhole shell D1000

Manhole shell D1000 can be used for both sewer and rainwater pumping, as a manhole, a sampling well, a grease separator, an oil trap or a water meter well. If required, the well can be extended with the service well extension D600. The well can be fitted with a D600 floating ductile iron cover, a plastic dome cover D600 and 800 or a plastic telescopic cover D600. Maximum installation depth is 3.5 m.

Manhole shell D1200

Manhole shell D1500 can be used for both sewer and rainwater pumping, as a manhole, a sampling well, a grease separator, an oil trap or a water meter well. If required, the well can be extended with the service well extension D600 or D800. The manhole is suitable for mounting a D600 or a D800 floating ductile iron cover, a plastic dome cover D600 and 800 or a plastic telescopic cover D600. Maximum installation depth is 3.5 m.

Manhole shell D1500 ball

Manhole shell D1500 ball can be used for both sewer and rainwater pumping, as a manhole, a sampling well, a grease separator, an oil trap or a water meter well. If required, the manhole can be extended with the service manhole extension D600. The manhole is suitable for mounting a D600 floating ductile iron cover, a plastic dome cover D600 and 800 or a plastic telescopic cover D600 on top of it. Maximum installation depth is 4.5 m.

Sewage inspection well D400

It is used as a inspection well in sewerage systems. The D400 mm PE pipe is suitable for the well extension. Pipe socket of the appropriate diameter is used to connect the outgoing pipe to the pipeline. Inlet pipe can be brought into the well directly or at up to 45 degrees. Welding must be used to connect the incoming pipe to the well. The maximum installation depth of the well is 3.2 m.

Inspection well bottom D560

It is used as a inspection well in sewerage systems. The D560 mm PE pipe is suitable for the well extension. Pipe socket of the appropriate diameter is used to connect the outgoing pipe to the pipeline. Inlet pipe can be brought into the well directly or at up to 45 degrees. Welding must be used to connect the incoming pipe to the well.

Dome covers D560, D600, D790, D800 and D850

Dome covers D560, D600, D790, D800 and D850 are designed for the use in wells located under green areas. The cover carries the weight of a person, but not transport. On request, we can add a custom logo onto the cover. The covers have locking and securing clips that, on request, can be added.

Telescopic covers D400, D600 and D800

Telescopic covers D400, D600 and D800 are designed for the use on green areas. The cover carries the weight of a person, but not transport. On request, we can add a custom logo onto the cover. The covers allow the height of the well to be adjusted up to 400 mm. The covers can be locked up. On request, we can fill the covers with polyurethane foam to increase heat resistance. We also offer telescope gaskets of respective dimentions.

Customer specific products